item divider Motix
Linear Unit KLE

Linear Unit KLE


Show all 3 variants
1 5.600
On request
configure now
* Mandatory information

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.This component is suitable for use in cleanroom applications. It has either been certified to ISO 14644-1 (particle emissions), ISO 14644-15 (outgassing) or another regulation pertaining to cleanroom technology, or it is identical to articles that have been certified. Alternatively, the component can be specially accredited for use in clean production due to its function or design.

Properties

Article number 0.0.605.02
Line line 8
ESD ESD-safe = No
Moment of Inertia, torsional It = 21,28 cm4
Moment of Inertia, x-axis Ix = 135,41 cm4
Moment of Inertia, y-axis Iy = 175,54 cm4
Total mass m = m1 + H * m2
Maximum operating load Fx max = 1.500 N
Maximum force in direction y Fy max = 1.500 N
Maximum force in direction z Fz max = 1.000 N
Weight m = 9,844 kg
Weight spec. length [g/mm] m = 8,771 g/mm
Weight, spec. Length m = 8,771 kg/m
Weight per length of the drive medium (timing belt, chain) mlz = 0,2 kg/m
Efficiency . = 1
Delivery unit 1 pce.
Basic mass (when stroke length = 0 mm) m1 = 9,844 kg
Mass per mm of stroke m2 = 8,771 g/mm
Max. acceleration amax  = 10 m/s2
Max. speed Vmax = 10 m/s
Repeat accuracy . = 0.1 mm
Mass moment of inertia when stroke length = 0 mm J0 = 3.316 kg mm2
Mass moment of inertia per kg of payload JN = 1.117,1 kg mm2/kg
Mass moment of inertia per m of stroke JH = 447 kg mm2/m
Stroke max. Hmax = 5.600 mm
max. drive torque . = 50 Nm
Maximum moment around the x axis Mx max = 50 Nm
Maximum moment around the y axis My max = 100 Nm
Maximum moment around the z axis Mz max = 150 Nm
Frictional moment . = 2,5 Nm
cleanroom suitability Yes
Safety clearance smin = 63,5 mm
Support width when Fy max. .  = 1.900 mm
Support width when Fz max. .  = 2.000 mm
Stroke h = 210 mm/r
Resistance Moment, x-axis Wx = 29,77 cm3
Resistance Moment, y-axis Wy = 43,89 cm3

Description

Complete Linear Units with variable stroke length (H), Drive Unit and Reverse Unit, Housing Profile with integrated roller guide on hardened guiding shafts, preset to be free of play. The Timing Belt in its guide grooves acts as a labyrinth seal, the Timing-Belt tensioning device is integrated into the Reverse Unit along with the ball-bearing mounted pulleys.
Guide slide with four-piece roller-bearing mounting, oil-lubricated roller contact (re-lubrication every 6 months or every 2500 km)
Linear Units KLE boast exceptional precision and low-vibration linear movement.
Simplified method for determining the maximum permissible load for the Roller Guides of a KLE:
The maximum deflection fmax of the system is governed by the dimension of the profile cross-section, the free profile length and the force applied.
It should not exceed 1mm/m.
The KLE profile must be given appropriate support if the linearity of movement has to be very precise.
The carriage plate of the KLE 8 80x80 has two drilled holes used to pin the carriage plate to the cover plate on the carriage. The carriage plate and cover plate need to be pinned so that they can accommodate the relevant forces and ensure they are reliably transmitted to the roller guide.
Two pinning holes are provided in the KLE 8 80x80 cover plate for this purpose.
It is advisable to use the dowel pins supplied with the carriage set in combination with the carriage plate.
KLE 8 80x80: Dowel Pin ISO 2338 6h8x40
If not using the original carriage plates, the pattern of holes must be copied from the drawings and transferred onto the custom carriage constructions.
Travel speed v in relation to input speed n (timing-belt drive)
Operational force Fx dependent on input torque M (timing-belt drives Fx > 500N)
h = horizontal orientation
v = vertical orientation
Maximum possible acceleration in relation to moved mass and installation orientation

Assembly Instructions

Variants

Sort by

Line:  5 Stroke length:  1 ... 2800 Guide type:  Shaft D6 Timing Belt width:  16 mm
Line:  6 Stroke length:  1 ... 5750 Guide type:  Shaft D10 Timing Belt width:  25 mm
Line:  8 Stroke length:  1 ... 5600 Guide type:  Shaft D14 Timing Belt width:  34 mm

Load Calculation

Downloads

Accessoires

Applications

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23301702
eCl@ss 4.1
36400701
eCl@ss 5.0
23329090
eCl@ss 5.1
23329090
UNSPSC 7.0
26111506
UNSPSC 9.0
26111506
eCl@ss 6.0.1
23301702
eCl@ss 7.1
23301702
eCl@ss 11.0
23301702
eCl@ss 4.0
36400806
Customs tariff number
84879090