item divider Motix
Fastener D30

Fastener D30

Show all 9 variants
* Mandatory information
Use in Engineeringtool Get CAD Data and Downloads

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.Components with this symbol meet the requirements of IEC 61340-5-1 and are therefore suitable for use in EPAs (electrostatic protected areas). By complying with the further stipulations of this standard you can use these products to create a safe environment for handling electronic components.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Preassembled
2 fastener halves, die-cast aluminium, natural
Washer, St, bright zinc-plated
Hexagon Socket Head Cap Screw DIN 912-M6x29,4, St, bright zinc-plated
Hexagon nut DIN 934 M6-I8I, St, bright zinc-plated

Properties

Article number 0.0.637.87
Line Line D30
ESD ESD-safe = Yes
Weight m = 102 g
Delivery unit 1 pce.
Torque M = 10 Nm

Description

Diagonal struts in next to no time: Fastener D30-45° offers all the benefits of Fastener D30 but at an angle of 45°. Its die-cast aluminium casing creates a mechanically locked connection that has a long-lasting hold even under load.
Fastener D30-45° is suitable for all (Profile) Tubes D30 and Profiles 6 D30. It does not require any additional machining or mitre cuts. Using external clamping technology, the fastener is ideal for quickly assembling truss or lattice-type structures and diagonal struts to accommodate torque loads.

Variants

Sort by

Fastener D30

Fastener D30

0.0.623.56
Connection type:  Right angled Mounting type:  Outside Angular position:  0° 2nd type:  Single Anti-torsion feature:  Separate anti-torsion feature
Fastener D30-45°

Fastener D30-45°

0.0.637.87
Connection type:  Angular position Mounting type:  Outside Angular position:  45° 2nd type:  Single Anti-torsion feature:  Separate anti-torsion feature
Fastener D30 T1

Fastener D30 T1

0.0.687.84
Connection type:  Right angled Mounting type:  Outside Angular position:  0° 2nd type:  Double Anti-torsion feature:  Integrated anti-torsion feature (T1)
Fastener D30, internal

Fastener D30, internal

0.0.669.52
Connection type:  Right angled Mounting type:  Inside Angular position:  0° 2nd type:  Double Anti-torsion feature:  None
Fastener D30-45°, internal

Fastener D30-45°, internal

0.0.678.66
Connection type:  Angular position Mounting type:  Inside Angular position:  45° 2nd type:  Double Anti-torsion feature:  None
Ball Joint Fastener D30

Ball Joint Fastener D30

0.0.646.85
Connection type:  Angular position Mounting type:  Outside Angular position:  -90° to +90° / 0° to +360° 2nd type:  Single Anti-torsion feature:  Separate anti-torsion feature
Fastener D30 with Clamp Lever

Fastener D30 with Clamp Lever

0.0.644.77
Connection type:  Right angled Mounting type:  Outside Angular position:  0° 2nd type:  Single Anti-torsion feature:  Separate anti-torsion feature
Fastener D30, internal, Connector M6-12

Fastener D30, internal, Connector M6-12

0.0.690.44
Connection type:  Right angled Mounting type:  Thread Angular position:  0° 2nd type:  Double Anti-torsion feature:  None
Fastener D30-45°, internal, Connector M6-12

Fastener D30-45°, internal, Connector M6-12

0.0.692.12
Connection type:  Angular position Mounting type:  Thread Angular position:  45° 2nd type:  Double Anti-torsion feature:  None

Downloads

CAD Data

Accessoires

Cap D30 R, grey similar to RAL 7042
Cap D30 R, grey similar to RAL 7042
0.0.624.11
Anti-Torsion Block 6 D30, grey similar to RAL 7042
Anti-Torsion Block 6 D30, grey similar to RAL 7042
0.0.630.39
Anti-Torsion Block 6 D30-45°, grey similar to RAL 7042
Anti-Torsion Block 6 D30-45°, grey similar to RAL 7042
0.0.630.40
Adapter D30/D28-25, grey similar to RAL 7042
Adapter D30/D28-25, grey similar to RAL 7042
0.0.642.62
Adapter 8 D30
Adapter 8 D30
0.0.630.51
Tube Adapter D30
Tube Adapter D30
0.0.630.61
Adapter 8 80 D30
Adapter 8 80 D30
0.0.653.24
Key with T-Handle 5 A/F
Key with T-Handle 5 A/F
0.0.026.29

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23360290
eCl@ss 11.0
23360290
UNSPSC 9.0
31162503
eCl@ss 4.0
22041424
eCl@ss 6.0.1
23250311
eCl@ss 5.0
23250311
eCl@ss 4.1
22041424
eCl@ss 5.1
23250311
UNSPSC 7.0
31162503
eCl@ss 7.1
23360290
Customs tariff number
76169990