Mitre-Butt-Fastening Set 8
0.0.492.25

Mitre-Butt-Fastening Set 8

0.0.492.25

CAD-data bekijken Aan vergelijkingslijst toewijzen Producten vergelijken https://be-product.item24.com/nl/directlink/pro/49225
Speciale eigenschappen:
item-producten zijn gebaseerd op verschillende modulaire afmetingen en hun bijbehorende systeemroutines. Profielen uit de series 5, 6, 8, 10 en 12 hebben allemaal hun eigen bevestigingsmiddelen in bijbehorende maten nodig. De profielen van serie X komen overeen met de systeemroutine van lijn 8 maar hebben een specifiek plat oppervlak met minimale bochtdiameters waardoor ze ideaal zijn voor het vervaardigen van gesealde constructies.
Onderdelen die aan RoHS voldoen bevatten geen gevaarlijke stoffen zoals lood of cadmium. De EG-richtlijn 2002/95/EG (RoHS 1) stelt beperkingen aan het gebruik van bepaalde stoffen in elektrische en elektronische apparatuur. Dat geldt ook voor batterijen e.d.
Alle materialen zijn geregistreerd in overeenstemming met de REACH-regels. REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) garandeert dat gebruikers over exacte informatie betreffende de soort en eigenschappen van de bedrijfsmiddelen, smeermiddelen enz. beschikken waarmee zij in aanraking kunnen komen.
Leveringseenheid
Schaalbegrenzing
Prijs
1 set
≥1
on application

on application

Meer productinformatie

  • Attributen
  • Details
  • Service
  • Tools
  • Downloads
  • Applicatie
  • Classificatie
Mitre-Butt-Fastening Set 8
0.0.492.25

Attributen

Line
line 8
Delivery Unit
1 set
Weight
m = 58 g
Mitre-Butt-Fastening Set 8
0.0.492.25

Details

Clamping pin M8x33, St, bright zinc-plated
Sleeve with bore, St, bright zinc-plated
Threaded sleeve, St, bright zinc-plated
Grub screw M10, St, bright zinc-plated
Grub screw DIN 915-M10x16, St, bright zinc-plated
2 Caps, PA grey
Mitre-Fastening Sets are suitable for connecting two profiles at an angle. They are used primarily when constructing frame elements and panel edging. The profile grooves facing each other inside the frame remain unobstructed so they can be used for holding panel elements.
The position of the clamping pins at right angles to the cut profile edge generates particularly high clamping forces on the fastening elements. The clamping screws are accessed from the side of the profile frame.
Mitre-Fastening Sets 8 are available for two different forms of profile connection:
- Mitre-Fastening Set 8
A mitred Profile 8 (at any angle γ between 30° and 90°) is screwed to the side of a Profile 8.
- Mitre-Butt-Fastening Set 8
Two mitred profiles (each with an identical angle γ between 30° and 90°) are connected together. This gives a possible angle between the profiles of (2γ) between 60° and 180°.
Your item dealer can provide the required mitre cuts and profile processing as a service.
Note: Despite the optimized design, the flow of forces across the inclined contact faces of the profiles is such that only part of the pretension of the screw connection is utilized. Mitre connections therefore have a lower load bearing capacity than other, right-angled profile connections (Standard-Fastening,
Universal-Fastening or Automatic-Fastening Set).
Mitre-Fastening Sets should therefore not be used for constructing basic frames and safety-related parts that are subject to high loads.
Distances a and b can also be calculated as a function of angle γ:

Using Mitre-Butt-Fastening Set 8:
1. Mitre both profiles at an angle γ.
2. Drill counterbores of diameter 14.2 mm for the fastener sleeve in the side of the profile (use of a drilling jig is recommended).
3. Drill a 9 mm dia. hole into the mitred face of both profiles (use of a drilling jig is recommended). The minimum drilling depth is 12 mm.
4. Insert the threaded fastener sleeve into the counter- bore of one of the profiles and screw in the clamping pin until the mark around the perimeter is level with the cut profile edge.
5. Secure the clamping pin in the threaded fastener sleeve using grub screw DIN 915 (M = 15 Nm).
6. Insert the fastener sleeve with bore into the second profile and fit the assemblies together.
7. Drive the special grub screw M10 into the fastener sleeve and tighten the profile connection (M = 15 Nm).
8. Fit the Caps onto the fastener sleeves.

Mitre-Butt-Fastening Set 8
0.0.492.25

Accessoires/service

Connection Processing, Mitre-Fastener 8
Leveringseenheid
1 pce.
Artikelnr.
0.0.494.12
Saw Cut Mitred for Small Cross-Sections
Leveringseenheid
1 pce.
Artikelnr.
0.0.616.26
Saw Cut Mitred for Medium Cross-Sections
Leveringseenheid
1 pce.
Artikelnr.
0.0.616.27
Mitre-Butt-Fastening Set 8
0.0.492.25

Tools

Drilling Jig Mitre Connection 8 D14.2
Leveringseenheid
1 pce.
Artikelnr.
0.0.493.72
Drilling Jig Mitre Connection 8 D9
Leveringseenheid
1 pce.
Artikelnr.
0.0.493.71
Step Drill, Mitre Connection 8
Leveringseenheid
1 pce.
Artikelnr.
0.0.492.60

Downloads

Enquiry form(440 KB)
Assembly instruction(2 MB)

Applicaties

Sliding protective hood - Article EX-01025

A visually stunning highlight with extremely practical functions.

Meer informatie
PDF CAD Onderdelenlijst
Mitre-Butt-Fastening Set 8
0.0.492.25

Classificaties

Classificaties zijn industriële productnormen die naast andere zaken worden gebruikt voor een gestructureerde verwerking in ERP en e-business systemen. Hebt u de classificatiegegevens voor alle producten van item nodig voor uw elektronisch aankoopsysteem? Zo ja, aarzel dan niet en neem contact met ons op.
eCl@ss 4.0
22041424
eCl@ss 4.1
22041424
eCl@ss 5.0
23250311
eCl@ss 5.1
23250311
eCl@ss 6.0.1
23250311
eCl@ss 7.1
23360290
eCl@ss 8.0
23360290
UNSPSC 7.0
31162503
UNSPSC 9.0
31162503
customs tariff number
83024200